<?xml version="1.0" encoding="UTF-8"?>
<LightBurnLibrary DisplayName="Omni Material Library">
    <Material name="Aluminium">
        <Entry Thickness="-1.0000" Desc="Aluminium" NoThickTitle="Aluminium">
            <CutSetting type="Scan">
                <index Value="0"/>
                <name Value=""/>
                <LinkPath Value="Aluminium/Aluminium/Aluminium"/>
                <minPower Value="12"/>
                <maxPower Value="100"/>
                <minPower2 Value="10"/>
                <maxPower2 Value="20"/>
                <speed Value="1000"/>
                <frequency Value="40000"/>
                <PPI Value="0"/>
                <QPulseWidth Value="1"/>
                <perfLen Value="0"/>
                <perfSkip Value="0"/>
                <dotTime Value="1"/>
                <dotSpacing Value="0.01"/>
                <bidir Value="0"/>
                <overscanPercent Value="5"/>
                <interval Value="0.03"/>
                <angle Value="-90"/>
                <tabsEnabled Value="1"/>
                <priority Value="0"/>
                <tabCount Value="1"/>
                <tabCountMax Value="1"/>
                <tabSpacing Value="50.04"/>
            </CutSetting>
        </Entry>
    </Material>
    <Material name="Aluminium photo">
        <Entry Thickness="-1.0000" Desc="Aluminium photo" NoThickTitle="Aluminium photo">
            <CutSetting type="Image">
                <index Value="0"/>
                <name Value=""/>
                <LinkPath Value="Aluminium photo/Aluminium photo/Aluminium photo"/>
                <maxPower Value="20"/>
                <maxPower2 Value="20"/>
                <speed Value="500"/>
                <frequency Value="40000"/>
                <QPulseWidth Value="10"/>
                <interval Value="0.0635"/>
                <angle Value="180"/>
                <priority Value="0"/>
                <tabCount Value="1"/>
                <tabCountMax Value="1"/>
                <ditherMode Value="jarvis"/>
                <dpi Value="400"/>
            </CutSetting>
        </Entry>
    </Material>
    <Material name="Anodised almuninium">
        <Entry Thickness="-1.0000" Desc="Anodised almuninium" NoThickTitle="Anodised almuninium">
            <CutSetting type="Image">
                <index Value="0"/>
                <name Value=""/>
                <LinkPath Value="Anodised almuninium/Anodised almuninium/Anodised almuninium"/>
                <maxPower Value="20"/>
                <maxPower2 Value="20"/>
                <speed Value="200"/>
                <frequency Value="40000"/>
                <QPulseWidth Value="1"/>
                <interval Value="0.0635"/>
                <priority Value="0"/>
                <tabCount Value="1"/>
                <tabCountMax Value="1"/>
                <negative Value="1"/>
                <ditherMode Value="jarvis"/>
                <dpi Value="400"/>
            </CutSetting>
        </Entry>
    </Material>
    <Material name="Black Acrylic">
        <Entry Thickness="-1.0000" Desc="Black Acrylic" NoThickTitle="Black Acrylic">
            <CutSetting type="Scan">
                <index Value="0"/>
                <name Value=""/>
                <LinkPath Value="Black Acrylic/Black Acrylic/Black Acrylic"/>
                <minPower Value="12"/>
                <maxPower Value="100"/>
                <minPower2 Value="10"/>
                <maxPower2 Value="20"/>
                <speed Value="1000"/>
                <frequency Value="40000"/>
                <PPI Value="0"/>
                <QPulseWidth Value="1"/>
                <perfLen Value="0"/>
                <perfSkip Value="0"/>
                <dotTime Value="1"/>
                <dotSpacing Value="0.01"/>
                <bidir Value="0"/>
                <overscanPercent Value="5"/>
                <interval Value="0.03"/>
                <angle Value="-90"/>
                <tabsEnabled Value="1"/>
                <priority Value="0"/>
                <tabCount Value="1"/>
                <tabCountMax Value="1"/>
                <tabSpacing Value="50.04"/>
            </CutSetting>
        </Entry>
    </Material>
    <Material name="Black Arylic photo">
        <Entry Thickness="-1.0000" Desc="Black Arylic photo" NoThickTitle="Black Arylic photo">
            <CutSetting type="Image">
                <index Value="0"/>
                <name Value=""/>
                <LinkPath Value="Black Arylic photo/Black Arylic photo/Black Arylic photo"/>
                <maxPower Value="20"/>
                <maxPower2 Value="20"/>
                <speed Value="200"/>
                <frequency Value="40000"/>
                <QPulseWidth Value="12"/>
                <interval Value="0.0635"/>
                <priority Value="0"/>
                <tabCount Value="1"/>
                <tabCountMax Value="1"/>
                <negative Value="1"/>
                <ditherMode Value="jarvis"/>
                <dpi Value="400"/>
            </CutSetting>
        </Entry>
    </Material>
    <Material name="Brass">
        <Entry Thickness="-1.0000" Desc="Brass" NoThickTitle="Brass">
            <CutSetting type="Scan">
                <index Value="0"/>
                <name Value=""/>
                <LinkPath Value="Brass/Brass/Brass"/>
                <minPower Value="12"/>
                <maxPower Value="80"/>
                <minPower2 Value="10"/>
                <maxPower2 Value="20"/>
                <speed Value="500"/>
                <frequency Value="40000"/>
                <PPI Value="0"/>
                <QPulseWidth Value="1"/>
                <perfLen Value="0"/>
                <perfSkip Value="0"/>
                <dotTime Value="1"/>
                <dotSpacing Value="0.01"/>
                <bidir Value="0"/>
                <overscanPercent Value="5"/>
                <interval Value="0.03"/>
                <angle Value="-90"/>
                <tabsEnabled Value="1"/>
                <priority Value="0"/>
                <tabCount Value="1"/>
                <tabCountMax Value="1"/>
                <tabSpacing Value="50.04"/>
            </CutSetting>
        </Entry>
    </Material>
    <Material name="Brass photo">
        <Entry Thickness="-1.0000" Desc="Brass photo" NoThickTitle="Brass photo">
            <CutSetting type="Image">
                <index Value="0"/>
                <name Value=""/>
                <LinkPath Value="Brass photo/Brass photo/Brass photo"/>
                <maxPower Value="20"/>
                <maxPower2 Value="20"/>
                <speed Value="500"/>
                <frequency Value="40000"/>
                <QPulseWidth Value="1"/>
                <interval Value="0.0635"/>
                <angle Value="180"/>
                <priority Value="0"/>
                <tabCount Value="1"/>
                <tabCountMax Value="1"/>
                <ditherMode Value="jarvis"/>
                <dpi Value="400"/>
            </CutSetting>
        </Entry>
    </Material>
    <Material name="Ceramic">
        <Entry Thickness="-1.0000" Desc="Ceramic" NoThickTitle="Ceramic">
            <CutSetting type="Scan">
                <index Value="0"/>
                <name Value=""/>
                <LinkPath Value="Ceramic/Ceramic/Ceramic"/>
                <minPower Value="12"/>
                <maxPower Value="80"/>
                <minPower2 Value="10"/>
                <maxPower2 Value="20"/>
                <speed Value="500"/>
                <frequency Value="40000"/>
                <PPI Value="0"/>
                <QPulseWidth Value="1"/>
                <numPasses Value="2"/>
                <perfLen Value="0"/>
                <perfSkip Value="0"/>
                <dotTime Value="1"/>
                <dotSpacing Value="0.01"/>
                <bidir Value="0"/>
                <overscanPercent Value="5"/>
                <interval Value="0.03"/>
                <angle Value="-90"/>
                <tabsEnabled Value="1"/>
                <priority Value="0"/>
                <tabCount Value="1"/>
                <tabCountMax Value="1"/>
                <tabSpacing Value="50.04"/>
            </CutSetting>
        </Entry>
    </Material>
    <Material name="DC_Aufkleber">
        <Entry Thickness="-1.0000" Desc="Aufkleber Schnitt" NoThickTitle="Aufkleber schneiden">
            <CutSetting type="Cut">
                <index Value="0"/>
                <name Value=""/>
                <LinkPath Value="DC_Aufkleber/Aufkleber schneiden/Aufkleber Schnitt"/>
                <minPower Value="12"/>
                <maxPower Value="50"/>
                <minPower2 Value="10"/>
                <maxPower2 Value="20"/>
                <speed Value="100"/>
                <frequency Value="40000"/>
                <PPI Value="0"/>
                <QPulseWidth Value="1"/>
                <numPasses Value="2"/>
                <perfLen Value="0"/>
                <perfSkip Value="0"/>
                <dotTime Value="1"/>
                <dotSpacing Value="0.01"/>
                <bidir Value="0"/>
                <overscanPercent Value="5"/>
                <interval Value="0.03"/>
                <angle Value="45"/>
                <tabsEnabled Value="1"/>
                <priority Value="0"/>
                <tabCount Value="1"/>
                <tabCountMax Value="1"/>
                <tabSpacing Value="50.04"/>
            </CutSetting>
        </Entry>
    </Material>
    <Material name="DC_Blaue Jeans Gravur">
        <Entry Thickness="-1.0000" Desc="Blaue Jeans gravieren (normal Blau)" NoThickTitle="Blaue Jeans gravieren">
            <CutSetting type="Image">
                <index Value="0"/>
                <name Value=""/>
                <LinkPath Value="DC_Blaue Jeans Gravur/Blaue Jeans gravieren/Blaue Jeans gravieren (normal Blau)"/>
                <minPower Value="5"/>
                <maxPower Value="45"/>
                <maxPower2 Value="20"/>
                <speed Value="700"/>
                <frequency Value="40000"/>
                <QPulseWidth Value="1"/>
                <dotSpacing Value="0"/>
                <interval Value="0.06"/>
                <angle Value="45"/>
                <priority Value="0"/>
                <tabCount Value="1"/>
                <tabCountMax Value="1"/>
                <ditherMode Value="jarvis"/>
                <dpi Value="423.3"/>
            </CutSetting>
        </Entry>
    </Material>
    <Material name="DC_Edelstahl">
        <Entry Thickness="-1.0000" Desc="Einfache Edelstahl Vektor Gravur Edelstahl Teller" NoThickTitle="Einfache Edelstahl Vektor Gravur">
            <CutSetting type="Scan">
                <index Value="0"/>
                <name Value=""/>
                <LinkPath Value="DC_Edelstahl/Einfache Edelstahl Vektor Gravur/Einfache Edelstahl Vektor Gravur Edelstahl Teller"/>
                <minPower Value="12"/>
                <maxPower Value="100"/>
                <minPower2 Value="10"/>
                <maxPower2 Value="20"/>
                <speed Value="500"/>
                <frequency Value="40000"/>
                <PPI Value="0"/>
                <QPulseWidth Value="1"/>
                <perfLen Value="0"/>
                <perfSkip Value="0"/>
                <dotTime Value="1"/>
                <dotSpacing Value="0.01"/>
                <overscanPercent Value="5"/>
                <interval Value="0.01"/>
                <angle Value="45"/>
                <tabsEnabled Value="1"/>
                <priority Value="0"/>
                <tabCount Value="1"/>
                <tabCountMax Value="1"/>
                <tabSpacing Value="50.04"/>
            </CutSetting>
        </Entry>
    </Material>
    <Material name="DC_Ettiketten Schnitt">
        <Entry Thickness="-1.0000" Desc="Ettiketten schneiden" NoThickTitle="Ettiketten schneiden">
            <CutSetting type="Cut">
                <index Value="0"/>
                <name Value=""/>
                <LinkPath Value="DC_Ettiketten Schnitt/Ettiketten schneiden/Ettiketten schneiden"/>
                <minPower Value="12"/>
                <maxPower Value="50"/>
                <minPower2 Value="10"/>
                <maxPower2 Value="20"/>
                <speed Value="100"/>
                <frequency Value="40000"/>
                <PPI Value="0"/>
                <QPulseWidth Value="1"/>
                <numPasses Value="2"/>
                <perfLen Value="0"/>
                <perfSkip Value="0"/>
                <dotTime Value="1"/>
                <dotSpacing Value="0.01"/>
                <bidir Value="0"/>
                <overscanPercent Value="5"/>
                <interval Value="0.03"/>
                <angle Value="45"/>
                <tabsEnabled Value="1"/>
                <priority Value="0"/>
                <tabCount Value="1"/>
                <tabCountMax Value="1"/>
                <tabSpacing Value="50.04"/>
            </CutSetting>
        </Entry>
    </Material>
    <Material name="DC_Frühstücksbrett">
        <Entry Thickness="-1.0000" Desc="Holz Akazienholz" NoThickTitle="Gravur Holz Brett">
            <CutSetting type="Scan">
                <index Value="0"/>
                <name Value=""/>
                <LinkPath Value="DC_Frühstücksbrett/Gravur Holz Brett/Holz Akazienholz"/>
                <minPower Value="12"/>
                <maxPower Value="80"/>
                <minPower2 Value="10"/>
                <maxPower2 Value="20"/>
                <speed Value="1000"/>
                <frequency Value="40000"/>
                <PPI Value="0"/>
                <QPulseWidth Value="5"/>
                <perfLen Value="0"/>
                <perfSkip Value="0"/>
                <dotTime Value="1"/>
                <dotSpacing Value="0.01"/>
                <overscanPercent Value="5"/>
                <interval Value="0.01"/>
                <angle Value="45"/>
                <tabsEnabled Value="1"/>
                <priority Value="0"/>
                <tabCount Value="1"/>
                <tabCountMax Value="1"/>
                <tabSpacing Value="50.04"/>
            </CutSetting>
        </Entry>
    </Material>
    <Material name="DC_Glas Gravur">
        <Entry Thickness="-1.0000" Desc="Glas Gravur auf Trinkglas" NoThickTitle="Einfache Glas Gravur">
            <CutSetting type="Scan">
                <index Value="0"/>
                <name Value=""/>
                <LinkPath Value="DC_Glas Gravur/Einfache Glas Gravur/Glas Gravur auf Trinkglas"/>
                <minPower Value="12"/>
                <maxPower Value="80"/>
                <minPower2 Value="10"/>
                <maxPower2 Value="20"/>
                <speed Value="400"/>
                <frequency Value="30000"/>
                <PPI Value="0"/>
                <QPulseWidth Value="1"/>
                <wobbleStep Value="0.01"/>
                <wobbleSize Value="0.3"/>
                <perfLen Value="0"/>
                <perfSkip Value="0"/>
                <dotTime Value="1"/>
                <dotSpacing Value="0.01"/>
                <overscanPercent Value="5"/>
                <interval Value="0.01"/>
                <priority Value="0"/>
                <tabCount Value="1"/>
                <tabCountMax Value="1"/>
                <tabSpacing Value="50.04"/>
            </CutSetting>
        </Entry>
    </Material>
    <Material name="DC_Glas Nugget Carbochon Gravur">
        <Entry Thickness="-1.0000" Desc="Glas Nugget Carbochon gravieren Glücksschwein" NoThickTitle="Glas Nugget Carbochon gravieren">
            <CutSetting type="Scan">
                <index Value="0"/>
                <name Value=""/>
                <LinkPath Value="DC_Glas Nugget Carbochon Gravur/Glas Nugget Carbochon gravieren/Glas Nugget Carbochon gravieren Glücksschwein"/>
                <maxPower Value="30"/>
                <maxPower2 Value="20"/>
                <speed Value="100"/>
                <frequency Value="30000"/>
                <QPulseWidth Value="1"/>
                <interval Value="0.03"/>
                <angle Value="45"/>
                <priority Value="0"/>
                <tabCount Value="1"/>
                <tabCountMax Value="1"/>
            </CutSetting>
        </Entry>
    </Material>
    <Material name="DC_Glas Schnitt mit Gravur">
        <Entry Thickness="-1.0000" Desc="Schnitt Glas (Konservenglas) nur mit Modus Füllen" NoThickTitle="Glas-Schnitt Modus Füllen">
            <CutSetting type="Scan">
                <index Value="0"/>
                <name Value=""/>
                <LinkPath Value="DC_Glas Schnitt mit Gravur/Glas-Schnitt Modus Füllen/Schnitt Glas (Konservenglas) nur mit Modus Füllen"/>
                <minPower Value="12"/>
                <maxPower Value="50"/>
                <minPower2 Value="10"/>
                <maxPower2 Value="20"/>
                <speed Value="300"/>
                <frequency Value="30000"/>
                <PPI Value="0"/>
                <QPulseWidth Value="1"/>
                <numPasses Value="50"/>
                <anglePerPass Value="10"/>
                <perfLen Value="0"/>
                <perfSkip Value="0"/>
                <dotTime Value="1"/>
                <dotSpacing Value="0.01"/>
                <bidir Value="0"/>
                <overscanPercent Value="5"/>
                <interval Value="0.02"/>
                <angle Value="45"/>
                <autoRotate Value="1"/>
                <tabsEnabled Value="1"/>
                <priority Value="0"/>
                <tabCount Value="1"/>
                <tabCountMax Value="1"/>
                <tabSpacing Value="50.04"/>
            </CutSetting>
        </Entry>
    </Material>
    <Material name="DC_Glas Tiefengravur">
        <Entry Thickness="-1.0000" Desc="Viereckiges Glas mit Dragoncut Logo und Baum. 70% graviert" NoThickTitle="Glas-Tiefengravur">
            <CutSetting type="Image">
                <index Value="0"/>
                <name Value=""/>
                <LinkPath Value="DC_Glas Tiefengravur/Glas-Tiefengravur/Viereckiges Glas mit Dragoncut Logo und Baum. 70% graviert"/>
                <minPower Value="10"/>
                <maxPower Value="20"/>
                <maxPower2 Value="20"/>
                <speed Value="300"/>
                <frequency Value="30000"/>
                <QPulseWidth Value="1"/>
                <numPasses Value="100"/>
                <dotWidth Value="0.02"/>
                <interval Value="0.02"/>
                <angle Value="45"/>
                <subname Value="3D Slice"/>
                <priority Value="0"/>
                <tabCount Value="1"/>
                <tabCountMax Value="1"/>
                <ditherMode Value="3dslice"/>
                <cleanupPass Value="1"/>
                <dpi Value="1270"/>
                <SubLayer type="Scan" index="1">
                    <maxPower Value="20"/>
                    <maxPower2 Value="20"/>
                    <speed Value="800"/>
                    <QPulseWidth Value="4"/>
                    <numPasses Value="10"/>
                    <anglePerPass Value="15"/>
                    <isCleanup Value="1"/>
                    <autoRotate Value="1"/>
                    <subname Value="Reinigung"/>
                </SubLayer>
            </CutSetting>
        </Entry>
    </Material>
    <Material name="DC_Messing Gravur">
        <Entry Thickness="-1.0000" Desc="Schmuck Messing Gravur" NoThickTitle="Messing Gravur">
            <CutSetting type="Scan">
                <index Value="0"/>
                <name Value=""/>
                <LinkPath Value="DC_Messing Gravur/Messing Gravur/Schmuck Messing Gravur"/>
                <maxPower Value="30"/>
                <maxPower2 Value="20"/>
                <speed Value="100"/>
                <frequency Value="40000"/>
                <QPulseWidth Value="1"/>
                <dotWidth Value="0.02"/>
                <interval Value="0.02"/>
                <angle Value="45"/>
                <priority Value="0"/>
                <tabCount Value="1"/>
                <tabCountMax Value="1"/>
            </CutSetting>
        </Entry>
    </Material>
    <Material name="DC_PLA-Grau Gravur">
        <Entry Thickness="-1.0000" Desc="Graues PLA-Filament Gravieren" NoThickTitle="PLA-Grau Gravur">
            <CutSetting type="Scan">
                <index Value="0"/>
                <name Value=""/>
                <LinkPath Value="DC_PLA-Grau Gravur/PLA-Grau Gravur/Graues PLA-Filament Gravieren"/>
                <minPower Value="12"/>
                <maxPower Value="80"/>
                <minPower2 Value="10"/>
                <maxPower2 Value="20"/>
                <speed Value="1000"/>
                <frequency Value="40000"/>
                <PPI Value="0"/>
                <QPulseWidth Value="15"/>
                <perfLen Value="0"/>
                <perfSkip Value="0"/>
                <dotTime Value="1"/>
                <dotSpacing Value="0.01"/>
                <bidir Value="0"/>
                <overscanPercent Value="5"/>
                <interval Value="0.03"/>
                <angle Value="45"/>
                <tabsEnabled Value="1"/>
                <priority Value="0"/>
                <tabCount Value="1"/>
                <tabCountMax Value="1"/>
                <tabSpacing Value="50.04"/>
            </CutSetting>
        </Entry>
    </Material>
    <Material name="DC_Papier 90g Schnitt">
        <Entry Thickness="-1.0000" Desc="Papier Schneiden 90g" NoThickTitle="Papier Schnitt 90g">
            <CutSetting type="Cut">
                <index Value="0"/>
                <name Value=""/>
                <LinkPath Value="DC_Papier 90g Schnitt/Papier Schnitt 90g/Papier Schneiden 90g"/>
                <minPower Value="12"/>
                <maxPower Value="50"/>
                <minPower2 Value="10"/>
                <maxPower2 Value="20"/>
                <speed Value="100"/>
                <frequency Value="40000"/>
                <PPI Value="0"/>
                <QPulseWidth Value="1"/>
                <perfLen Value="0"/>
                <perfSkip Value="0"/>
                <dotTime Value="1"/>
                <dotSpacing Value="0.01"/>
                <bidir Value="0"/>
                <overscanPercent Value="5"/>
                <interval Value="0.03"/>
                <angle Value="45"/>
                <tabsEnabled Value="1"/>
                <priority Value="0"/>
                <tabCount Value="1"/>
                <tabCountMax Value="1"/>
                <tabSpacing Value="50.04"/>
            </CutSetting>
        </Entry>
    </Material>
    <Material name="DC_Pappe Bierdeckel Schnitt">
        <Entry Thickness="-1.0000" Desc="Pappie schneiden - Bierdeckel" NoThickTitle="Pappe Bierdeckel Schnitt">
            <CutSetting type="Cut">
                <index Value="0"/>
                <name Value=""/>
                <LinkPath Value="DC_Pappe Bierdeckel Schnitt/Pappe Bierdeckel Schnitt/Pappie schneiden - Bierdeckel"/>
                <minPower Value="12"/>
                <maxPower Value="50"/>
                <minPower2 Value="10"/>
                <maxPower2 Value="20"/>
                <speed Value="100"/>
                <frequency Value="40000"/>
                <PPI Value="0"/>
                <QPulseWidth Value="1"/>
                <numPasses Value="5"/>
                <perfLen Value="0"/>
                <perfSkip Value="0"/>
                <dotTime Value="1"/>
                <dotSpacing Value="0.01"/>
                <bidir Value="0"/>
                <overscanPercent Value="5"/>
                <interval Value="0.03"/>
                <angle Value="45"/>
                <tabsEnabled Value="1"/>
                <priority Value="0"/>
                <tabCount Value="1"/>
                <tabCountMax Value="1"/>
                <tabSpacing Value="50.04"/>
            </CutSetting>
        </Entry>
    </Material>
    <Material name="DC_Pappel">
        <Entry Thickness="3.0000" Desc="Pappel Schneiden 3mm Stärke">
            <CutSetting type="Cut">
                <index Value="0"/>
                <name Value=""/>
                <LinkPath Value="DC_Pappel/3.0000/Pappel Schneiden 3mm Stärke"/>
                <minPower Value="12"/>
                <maxPower Value="80"/>
                <minPower2 Value="10"/>
                <maxPower2 Value="20"/>
                <speed Value="60"/>
                <frequency Value="40000"/>
                <PPI Value="0"/>
                <QPulseWidth Value="1"/>
                <numPasses Value="7"/>
                <perfLen Value="0"/>
                <perfSkip Value="0"/>
                <dotTime Value="1"/>
                <dotSpacing Value="0.01"/>
                <bidir Value="0"/>
                <overscanPercent Value="5"/>
                <interval Value="0.03"/>
                <angle Value="-90"/>
                <tabsEnabled Value="1"/>
                <priority Value="0"/>
                <tabCount Value="1"/>
                <tabCountMax Value="1"/>
                <tabSpacing Value="50.04"/>
            </CutSetting>
        </Entry>
    </Material>
    <Material name="DC_Silber 925">
        <Entry Thickness="-1.0000" Desc="Schmuck Silber 925 Gravur" NoThickTitle="Silber Gravur 925">
            <CutSetting type="Scan">
                <index Value="0"/>
                <name Value=""/>
                <LinkPath Value="DC_Silber 925/Silber Gravur 925/Schmuck Silber 925 Gravur"/>
                <minPower Value="12"/>
                <maxPower Value="100"/>
                <minPower2 Value="10"/>
                <maxPower2 Value="20"/>
                <speed Value="100"/>
                <frequency Value="40000"/>
                <PPI Value="0"/>
                <QPulseWidth Value="1"/>
                <perfLen Value="0"/>
                <perfSkip Value="0"/>
                <dotTime Value="1"/>
                <dotSpacing Value="0.01"/>
                <bidir Value="0"/>
                <overscanPercent Value="5"/>
                <dotWidth Value="0.01"/>
                <interval Value="0.02"/>
                <angle Value="-90"/>
                <tabsEnabled Value="1"/>
                <priority Value="0"/>
                <tabCount Value="1"/>
                <tabCountMax Value="1"/>
                <tabSpacing Value="50.04"/>
            </CutSetting>
        </Entry>
    </Material>
    <Material name="DC_Tastatur Hell Gravur">
        <Entry Thickness="-1.0000" Desc="Tastatur Hell gravieren Tasten" NoThickTitle="Tastatur Hell gravieren">
            <CutSetting type="Scan">
                <index Value="0"/>
                <name Value=""/>
                <LinkPath Value="DC_Tastatur Hell Gravur/Tastatur Hell gravieren/Tastatur Hell gravieren Tasten"/>
                <minPower Value="12"/>
                <maxPower Value="80"/>
                <minPower2 Value="10"/>
                <maxPower2 Value="20"/>
                <speed Value="1000"/>
                <frequency Value="40000"/>
                <PPI Value="0"/>
                <QPulseWidth Value="15"/>
                <perfLen Value="0"/>
                <perfSkip Value="0"/>
                <dotTime Value="1"/>
                <dotSpacing Value="0.01"/>
                <bidir Value="0"/>
                <overscanPercent Value="5"/>
                <interval Value="0.03"/>
                <angle Value="-90"/>
                <tabsEnabled Value="1"/>
                <priority Value="0"/>
                <tabCount Value="1"/>
                <tabCountMax Value="1"/>
                <tabSpacing Value="50.04"/>
            </CutSetting>
        </Entry>
    </Material>
    <Material name="Fruit-Orange">
        <Entry Thickness="-1.0000" Desc="Fruit-Orange" NoThickTitle="Fruit-Orange">
            <CutSetting type="Scan">
                <index Value="0"/>
                <name Value=""/>
                <LinkPath Value="Fruit-Orange/Fruit-Orange/Fruit-Orange"/>
                <minPower Value="12"/>
                <maxPower Value="100"/>
                <minPower2 Value="10"/>
                <maxPower2 Value="20"/>
                <speed Value="1000"/>
                <frequency Value="40000"/>
                <PPI Value="0"/>
                <QPulseWidth Value="1"/>
                <numPasses Value="2"/>
                <perfLen Value="0"/>
                <perfSkip Value="0"/>
                <dotTime Value="1"/>
                <dotSpacing Value="0.01"/>
                <bidir Value="0"/>
                <overscanPercent Value="5"/>
                <interval Value="0.03"/>
                <angle Value="-90"/>
                <tabsEnabled Value="1"/>
                <priority Value="0"/>
                <tabCount Value="1"/>
                <tabCountMax Value="1"/>
                <tabSpacing Value="50.04"/>
            </CutSetting>
        </Entry>
    </Material>
    <Material name="Jean">
        <Entry Thickness="-1.0000" Desc="Jean" NoThickTitle="Jean">
            <CutSetting type="Scan">
                <index Value="0"/>
                <name Value=""/>
                <LinkPath Value="Jean/Jean/Jean"/>
                <minPower Value="12"/>
                <maxPower Value="80"/>
                <minPower2 Value="10"/>
                <maxPower2 Value="20"/>
                <speed Value="1000"/>
                <frequency Value="40000"/>
                <PPI Value="0"/>
                <QPulseWidth Value="7"/>
                <perfLen Value="0"/>
                <perfSkip Value="0"/>
                <dotTime Value="1"/>
                <dotSpacing Value="0.01"/>
                <bidir Value="0"/>
                <overscanPercent Value="5"/>
                <interval Value="0.03"/>
                <angle Value="-90"/>
                <tabsEnabled Value="1"/>
                <priority Value="0"/>
                <tabCount Value="1"/>
                <tabCountMax Value="1"/>
                <tabSpacing Value="50.04"/>
            </CutSetting>
        </Entry>
    </Material>
    <Material name="Leaf photo">
        <Entry Thickness="-1.0000" Desc="Leaf photo" NoThickTitle="Leaf photo">
            <CutSetting type="Image">
                <index Value="0"/>
                <name Value=""/>
                <LinkPath Value="Leaf photo/Leaf photo/Leaf photo"/>
                <maxPower Value="75"/>
                <maxPower2 Value="20"/>
                <speed Value="500"/>
                <frequency Value="40000"/>
                <QPulseWidth Value="1"/>
                <interval Value="0.03"/>
                <angle Value="180"/>
                <priority Value="0"/>
                <tabCount Value="1"/>
                <tabCountMax Value="1"/>
                <ditherMode Value="atkinson"/>
                <dpi Value="846"/>
            </CutSetting>
        </Entry>
    </Material>
    <Material name="Leather">
        <Entry Thickness="-1.0000" Desc="Leather" NoThickTitle="Leather">
            <CutSetting type="Scan">
                <index Value="0"/>
                <name Value=""/>
                <LinkPath Value="Leather/Leather/Leather"/>
                <minPower Value="12"/>
                <maxPower Value="50"/>
                <minPower2 Value="10"/>
                <maxPower2 Value="20"/>
                <speed Value="1000"/>
                <frequency Value="30000"/>
                <PPI Value="0"/>
                <QPulseWidth Value="20"/>
                <perfLen Value="0"/>
                <perfSkip Value="0"/>
                <dotTime Value="1"/>
                <dotSpacing Value="0.01"/>
                <bidir Value="0"/>
                <overscanPercent Value="5"/>
                <interval Value="0.03"/>
                <angle Value="45"/>
                <tabsEnabled Value="1"/>
                <priority Value="0"/>
                <tabCount Value="1"/>
                <tabCountMax Value="1"/>
                <tabSpacing Value="50.04"/>
            </CutSetting>
        </Entry>
    </Material>
    <Material name="Mirror Stainless Steel">
        <Entry Thickness="-1.0000" Desc="Mirror Stainless Steel" NoThickTitle="Mirror Stainless Steel">
            <CutSetting type="Scan">
                <index Value="0"/>
                <name Value=""/>
                <LinkPath Value="Mirror Stainless Steel/Mirror Stainless Steel/Mirror Stainless Steel"/>
                <minPower Value="12"/>
                <maxPower Value="100"/>
                <minPower2 Value="10"/>
                <maxPower2 Value="20"/>
                <speed Value="1000"/>
                <frequency Value="40000"/>
                <PPI Value="0"/>
                <QPulseWidth Value="1"/>
                <perfLen Value="0"/>
                <perfSkip Value="0"/>
                <dotTime Value="1"/>
                <dotSpacing Value="0.01"/>
                <bidir Value="0"/>
                <overscanPercent Value="5"/>
                <interval Value="0.03"/>
                <angle Value="-90"/>
                <tabsEnabled Value="1"/>
                <priority Value="0"/>
                <tabCount Value="1"/>
                <tabCountMax Value="1"/>
                <tabSpacing Value="50.04"/>
            </CutSetting>
        </Entry>
    </Material>
    <Material name="Mirror Stainless Steel Photos">
        <Entry Thickness="-1.0000" Desc="Mirror Stainless Steel Photos" NoThickTitle="Mirror Stainless Steel Photos">
            <CutSetting type="Image">
                <index Value="0"/>
                <name Value=""/>
                <LinkPath Value="Mirror Stainless Steel Photos/Mirror Stainless Steel Photos/Mirror Stainless Steel Photos"/>
                <maxPower Value="20"/>
                <maxPower2 Value="20"/>
                <speed Value="200"/>
                <frequency Value="40000"/>
                <QPulseWidth Value="10"/>
                <interval Value="0.0635"/>
                <priority Value="0"/>
                <tabCount Value="1"/>
                <tabCountMax Value="1"/>
                <ditherMode Value="jarvis"/>
                <dpi Value="400"/>
            </CutSetting>
        </Entry>
    </Material>
    <Material name="Painted Metal">
        <Entry Thickness="-1.0000" Desc="Painted Metal" NoThickTitle="Painted Metal">
            <CutSetting type="Scan">
                <index Value="0"/>
                <name Value=""/>
                <LinkPath Value="Painted Metal/Painted Metal/Painted Metal"/>
                <minPower Value="12"/>
                <maxPower Value="100"/>
                <minPower2 Value="10"/>
                <maxPower2 Value="20"/>
                <speed Value="1000"/>
                <frequency Value="40000"/>
                <PPI Value="0"/>
                <QPulseWidth Value="1"/>
                <numPasses Value="2"/>
                <perfLen Value="0"/>
                <perfSkip Value="0"/>
                <dotTime Value="1"/>
                <dotSpacing Value="0.01"/>
                <bidir Value="0"/>
                <overscanPercent Value="5"/>
                <interval Value="0.03"/>
                <angle Value="-90"/>
                <tabsEnabled Value="1"/>
                <priority Value="0"/>
                <tabCount Value="1"/>
                <tabCountMax Value="1"/>
                <tabSpacing Value="50.04"/>
            </CutSetting>
        </Entry>
    </Material>
    <Material name="Painted Metal Photos">
        <Entry Thickness="-1.0000" Desc="Painted Metal Photos" NoThickTitle="Painted Metal Photos">
            <CutSetting type="Image">
                <index Value="0"/>
                <name Value=""/>
                <LinkPath Value="Painted Metal Photos/Painted Metal Photos/Painted Metal Photos"/>
                <maxPower Value="20"/>
                <maxPower2 Value="20"/>
                <speed Value="200"/>
                <frequency Value="40000"/>
                <QPulseWidth Value="12"/>
                <interval Value="0.0635"/>
                <priority Value="0"/>
                <tabCount Value="1"/>
                <tabCountMax Value="1"/>
                <negative Value="1"/>
                <ditherMode Value="jarvis"/>
                <dpi Value="400"/>
            </CutSetting>
        </Entry>
    </Material>
    <Material name="Paper">
        <Entry Thickness="-1.0000" Desc="Paper" NoThickTitle="Paper">
            <CutSetting type="Scan">
                <index Value="0"/>
                <name Value=""/>
                <LinkPath Value="Paper/Paper/Paper"/>
                <minPower Value="12"/>
                <maxPower Value="50"/>
                <minPower2 Value="10"/>
                <maxPower2 Value="20"/>
                <speed Value="1000"/>
                <frequency Value="30000"/>
                <PPI Value="0"/>
                <QPulseWidth Value="5"/>
                <perfLen Value="0"/>
                <perfSkip Value="0"/>
                <dotTime Value="1"/>
                <dotSpacing Value="0.01"/>
                <bidir Value="0"/>
                <overscanPercent Value="5"/>
                <interval Value="0.03"/>
                <angle Value="45"/>
                <tabsEnabled Value="1"/>
                <priority Value="0"/>
                <tabCount Value="1"/>
                <tabCountMax Value="1"/>
                <tabSpacing Value="50.04"/>
            </CutSetting>
        </Entry>
    </Material>
    <Material name="Paper Cut">
        <Entry Thickness="1.0000" Desc="Paper Cut">
            <CutSetting type="Cut">
                <index Value="0"/>
                <name Value=""/>
                <LinkPath Value="Paper Cut/1.0000/Paper Cut"/>
                <minPower Value="12"/>
                <maxPower Value="50"/>
                <minPower2 Value="10"/>
                <maxPower2 Value="20"/>
                <speed Value="100"/>
                <frequency Value="40000"/>
                <PPI Value="0"/>
                <QPulseWidth Value="1"/>
                <numPasses Value="5"/>
                <perfLen Value="0"/>
                <perfSkip Value="0"/>
                <dotTime Value="1"/>
                <dotSpacing Value="0.01"/>
                <bidir Value="0"/>
                <overscanPercent Value="5"/>
                <interval Value="0.03"/>
                <angle Value="45"/>
                <tabsEnabled Value="1"/>
                <priority Value="0"/>
                <tabCount Value="1"/>
                <tabCountMax Value="1"/>
                <tabSpacing Value="50.04"/>
            </CutSetting>
        </Entry>
    </Material>
    <Material name="Plastic">
        <Entry Thickness="-1.0000" Desc="Plastic" NoThickTitle="Plastic">
            <CutSetting type="Scan">
                <index Value="0"/>
                <name Value=""/>
                <LinkPath Value="Plastic/Plastic/Plastic"/>
                <minPower Value="12"/>
                <maxPower Value="80"/>
                <minPower2 Value="10"/>
                <maxPower2 Value="20"/>
                <speed Value="1000"/>
                <frequency Value="40000"/>
                <PPI Value="0"/>
                <QPulseWidth Value="15"/>
                <perfLen Value="0"/>
                <perfSkip Value="0"/>
                <dotTime Value="1"/>
                <dotSpacing Value="0.01"/>
                <bidir Value="0"/>
                <overscanPercent Value="5"/>
                <interval Value="0.03"/>
                <angle Value="-90"/>
                <tabsEnabled Value="1"/>
                <priority Value="0"/>
                <tabCount Value="1"/>
                <tabCountMax Value="1"/>
                <tabSpacing Value="50.04"/>
            </CutSetting>
        </Entry>
    </Material>
    <Material name="Silk">
        <Entry Thickness="-1.0000" Desc="Silk" NoThickTitle="Silk">
            <CutSetting type="Scan">
                <index Value="0"/>
                <name Value=""/>
                <LinkPath Value="Silk/Silk/Silk"/>
                <minPower Value="12"/>
                <maxPower Value="80"/>
                <minPower2 Value="10"/>
                <maxPower2 Value="20"/>
                <speed Value="1000"/>
                <frequency Value="40000"/>
                <PPI Value="0"/>
                <QPulseWidth Value="15"/>
                <perfLen Value="0"/>
                <perfSkip Value="0"/>
                <dotTime Value="1"/>
                <dotSpacing Value="0.01"/>
                <bidir Value="0"/>
                <overscanPercent Value="5"/>
                <interval Value="0.03"/>
                <angle Value="-90"/>
                <tabsEnabled Value="1"/>
                <priority Value="0"/>
                <tabCount Value="1"/>
                <tabCountMax Value="1"/>
                <tabSpacing Value="50.04"/>
            </CutSetting>
        </Entry>
    </Material>
    <Material name="Slate">
        <Entry Thickness="-1.0000" Desc="Slate" NoThickTitle="Slate">
            <CutSetting type="Scan">
                <index Value="0"/>
                <name Value=""/>
                <LinkPath Value="Slate/Slate/Slate"/>
                <minPower Value="12"/>
                <maxPower Value="80"/>
                <minPower2 Value="10"/>
                <maxPower2 Value="20"/>
                <speed Value="1000"/>
                <frequency Value="40000"/>
                <PPI Value="0"/>
                <QPulseWidth Value="1"/>
                <perfLen Value="0"/>
                <perfSkip Value="0"/>
                <dotTime Value="1"/>
                <dotSpacing Value="0.01"/>
                <bidir Value="0"/>
                <overscanPercent Value="5"/>
                <interval Value="0.03"/>
                <angle Value="-90"/>
                <tabsEnabled Value="1"/>
                <priority Value="0"/>
                <tabCount Value="1"/>
                <tabCountMax Value="1"/>
                <tabSpacing Value="50.04"/>
            </CutSetting>
        </Entry>
    </Material>
    <Material name="Stainless Steel">
        <Entry Thickness="-1.0000" Desc="Stainless Steel" NoThickTitle="Stainless Steel">
            <CutSetting type="Scan">
                <index Value="0"/>
                <name Value=""/>
                <LinkPath Value="Stainless Steel/Stainless Steel/Stainless Steel"/>
                <minPower Value="12"/>
                <maxPower Value="100"/>
                <minPower2 Value="10"/>
                <maxPower2 Value="20"/>
                <speed Value="1000"/>
                <frequency Value="40000"/>
                <PPI Value="0"/>
                <QPulseWidth Value="1"/>
                <perfLen Value="0"/>
                <perfSkip Value="0"/>
                <dotTime Value="1"/>
                <dotSpacing Value="0.01"/>
                <bidir Value="0"/>
                <overscanPercent Value="5"/>
                <interval Value="0.03"/>
                <angle Value="-90"/>
                <tabsEnabled Value="1"/>
                <priority Value="0"/>
                <tabCount Value="1"/>
                <tabCountMax Value="1"/>
                <tabSpacing Value="50.04"/>
            </CutSetting>
        </Entry>
    </Material>
    <Material name="Stainless steel photo">
        <Entry Thickness="-1.0000" Desc="Stainless steel photo" NoThickTitle="Stainless steel photo">
            <CutSetting type="Image">
                <index Value="0"/>
                <name Value=""/>
                <LinkPath Value="Stainless steel photo/Stainless steel photo/Stainless steel photo"/>
                <maxPower Value="20"/>
                <maxPower2 Value="20"/>
                <speed Value="500"/>
                <frequency Value="40000"/>
                <QPulseWidth Value="5"/>
                <interval Value="0.0635"/>
                <priority Value="0"/>
                <tabCount Value="1"/>
                <tabCountMax Value="1"/>
                <ditherMode Value="jarvis"/>
                <dpi Value="400"/>
            </CutSetting>
        </Entry>
    </Material>
    <Material name="Stone">
        <Entry Thickness="-1.0000" Desc="Stone" NoThickTitle="Stone">
            <CutSetting type="Scan">
                <index Value="0"/>
                <name Value=""/>
                <LinkPath Value="Stone/Stone/Stone"/>
                <minPower Value="12"/>
                <maxPower Value="80"/>
                <minPower2 Value="10"/>
                <maxPower2 Value="20"/>
                <speed Value="500"/>
                <frequency Value="40000"/>
                <PPI Value="0"/>
                <QPulseWidth Value="1"/>
                <numPasses Value="9"/>
                <perfLen Value="0"/>
                <perfSkip Value="0"/>
                <dotTime Value="1"/>
                <dotSpacing Value="0.01"/>
                <bidir Value="0"/>
                <overscanPercent Value="5"/>
                <interval Value="0.03"/>
                <angle Value="-90"/>
                <tabsEnabled Value="1"/>
                <priority Value="0"/>
                <tabCount Value="1"/>
                <tabCountMax Value="1"/>
                <tabSpacing Value="50.04"/>
            </CutSetting>
        </Entry>
    </Material>
    <Material name="Transparent Acrylic">
        <Entry Thickness="-1.0000" Desc="Transparent Acrylic" NoThickTitle="Transparent Acrylic">
            <CutSetting type="Scan">
                <index Value="0"/>
                <name Value=""/>
                <LinkPath Value="Transparent Acrylic/Transparent Acrylic/Transparent Acrylic"/>
                <minPower Value="12"/>
                <maxPower Value="80"/>
                <minPower2 Value="10"/>
                <maxPower2 Value="20"/>
                <speed Value="500"/>
                <frequency Value="40000"/>
                <PPI Value="0"/>
                <QPulseWidth Value="1"/>
                <perfLen Value="0"/>
                <perfSkip Value="0"/>
                <dotTime Value="1"/>
                <dotSpacing Value="0.01"/>
                <bidir Value="0"/>
                <overscanPercent Value="5"/>
                <interval Value="0.03"/>
                <angle Value="-90"/>
                <tabsEnabled Value="1"/>
                <priority Value="0"/>
                <tabCount Value="1"/>
                <tabCountMax Value="1"/>
                <tabSpacing Value="50.04"/>
            </CutSetting>
        </Entry>
    </Material>
    <Material name="Transparent Acrylic photo">
        <Entry Thickness="-1.0000" Desc="Transparent Acrylic photo" NoThickTitle="Transparent Acrylic photo">
            <CutSetting type="Image">
                <index Value="0"/>
                <name Value=""/>
                <LinkPath Value="Transparent Acrylic photo/Transparent Acrylic photo/Transparent Acrylic photo"/>
                <maxPower Value="20"/>
                <maxPower2 Value="20"/>
                <speed Value="200"/>
                <frequency Value="40000"/>
                <QPulseWidth Value="1"/>
                <interval Value="0.064"/>
                <priority Value="0"/>
                <tabCount Value="1"/>
                <tabCountMax Value="1"/>
                <ditherMode Value="jarvis"/>
                <dpi Value="396"/>
            </CutSetting>
        </Entry>
    </Material>
    <Material name="Wood">
        <Entry Thickness="-1.0000" Desc="Wood" NoThickTitle="Wood">
            <CutSetting type="Scan">
                <index Value="0"/>
                <name Value=""/>
                <LinkPath Value="Wood/Wood/Wood"/>
                <minPower Value="12"/>
                <maxPower Value="80"/>
                <minPower2 Value="10"/>
                <maxPower2 Value="20"/>
                <speed Value="1000"/>
                <frequency Value="40000"/>
                <PPI Value="0"/>
                <QPulseWidth Value="5"/>
                <numPasses Value="2"/>
                <perfLen Value="0"/>
                <perfSkip Value="0"/>
                <dotTime Value="1"/>
                <dotSpacing Value="0.01"/>
                <bidir Value="0"/>
                <overscanPercent Value="5"/>
                <interval Value="0.03"/>
                <angle Value="-90"/>
                <tabsEnabled Value="1"/>
                <priority Value="0"/>
                <tabCount Value="1"/>
                <tabCountMax Value="1"/>
                <tabSpacing Value="50.04"/>
            </CutSetting>
        </Entry>
    </Material>
    <Material name="Wood photo">
        <Entry Thickness="-1.0000" Desc="Wood photo" NoThickTitle="Wood photo">
            <CutSetting type="Image">
                <index Value="0"/>
                <name Value=""/>
                <LinkPath Value="Wood photo/Wood photo/Wood photo"/>
                <maxPower Value="75"/>
                <maxPower2 Value="20"/>
                <speed Value="500"/>
                <frequency Value="40000"/>
                <QPulseWidth Value="1"/>
                <interval Value="0.03"/>
                <angle Value="180"/>
                <priority Value="0"/>
                <tabCount Value="1"/>
                <tabCountMax Value="1"/>
                <ditherMode Value="jarvis"/>
                <dpi Value="846"/>
            </CutSetting>
        </Entry>
    </Material>
</LightBurnLibrary>